Shamu Advanced Material
Service line
86 0532-66739676
Functional Polyurea

Qtech-402 Power Industry Heat Resistant & Heavy Duty Polyurea Material



Qtech-402 Power Industry Heat Resistant & Heavy Duty Polyurea Material

Production Description
Qtech-402 Power Industry Heat Resistant & Heavy Duty Polyurea Material is the state of the art 100% solids, ultra fast cure, flexible, spray-applied, high build, and two components aromatic pure polyurea elastomer. The system consists of A component, a quasi-prepolymer rich of free NCO, and B component, a mixture of polyetheramines, amine extenders and other additives. Qtech-402 is used by itself or in combination with other materials to produce protective coatings, heat resistant layer, and thermal-protective liners on concrete and other substrates. Qtech-402 can produce an extremely tough film at all thicknesses; it may be applied in all positions and to any suitably prepared substrate. Qtech-402 has excellent heat resistant and heavy duty property, its physical properties conforms to desulfuration and denitration design of power industry. It is relatively moisture and temperature insensitive, allowing application in the most problematic ambient conditions.
1. Fast cure, short down time, no sagging.
2. Excellent Physiochemical Properties.
3. Bondable and paintable to various kinds of substrates.
4. Excellent thermal stability, Ambient insensitive.
5. 100% Solids, No VOC’s, Odorless, No Toxic Vapors.
6. Good resistance to a wide range of chemical attack.
7. Good heat resistant, heavy duty and Durability.
8. Good weather ability, Added color stability.
9. Seamless, flexible, slick and non-porous.
10. No chalking and fading in long-term use outdoors.
Recommended Uses
Qtech-402 Power Industry Heat Resistant & Heavy Duty Polyurea Material is an ultra fast cure system; it can be applied at thicknesses of several ten millimeters, or greater, in a single application. It can be widely used in power industry and smelting industry Desulfurization Tower, Denitrification Tower, Charring Tower, Evaporation Tanks, Neutralization Tanks; it can also be applied in: Oil & Gas Transmission, pipeline antiseptic treatment , Industrial Facilities ,and so on.

Physical Properties

Tensile Strength/ MPa




Tear Strength/( N/mm)


Shore Hardness


Friction Coefficient


Adhesion /(Pull off, MPa)


Density/( g/cm3)


Chemical Attack Resistance


High Temperature Stability


Product Characteristics



VOC (calculated)


Gel Time/s


Tack Free/s


Shelf Life

6 months, unopened at 15~40 ºC

Flash Point/ ºC


Mix Ratio V/V

1: 1

Recommended Spreading Thickness/mm




Drying time is temperature, humidity, and film thickness dependent.
Chemical Resistance
Consult our technicist and chemical test date for corrosive environment applications.
Consult our application information and recommended method statements.
•  Part A: 220 kilogram per drums.
•  Part B: 200 kilogram per drums.
Custom package available at additional charge.
1. Qtech product is intended for industrial use by properly trained professional applicators only.
2. Thoroughly mix container of B component with an air-driven power mixer for a minimum of 15 minutes prior to application.
3. Adding a nitrogen blanket is strongly recommended for use on the "A" component for storage after opening.
4. It is a 100% solids production, strictly prohibit add any diluents.
5. The quality and fitness of the product is depending upon the proper mixture and application of the component by the applicator.
6.This specification is an accumulation of long term testing and experience. Published technical data and instructions are subject to change without notice.
7.  For more information please consult the Qingdao Shamu International Trade Co., Ltd. or visit our website www.shamu-intl.com or www.polyurea.cn.